Description
For Samples: Cell culture fluid & body fluid & tissue homogenate Serum or blood plasma
Intended Uses: This ATF3 ELISA kit is intended for laboratory research use only and not for use in diagnostic or therapeutic procedures. The stop solution changes the color from blue to yellow and the intensity of the color is measured at 450 nm using a spectrophotometer. In order to measure the concentration of ATF3 in the sample, this ATF3 ELISA Kit includes a set of calibration standards. The calibration standards are assayed at the same time as the samples and allow the operator to produce a standard curve of Optical Density versus ATF3 concentration. The concentration of in the samples is then determined by comparing the O.D. of the samples to the standard curve.
Principle of the Assay: The coated well immunoenzymatic assay for the quantitative measurement of ATF3 utilizes a multiclonal anti-ATF3 antibody and an ATF3-HRP conjugate. The assay sample and buffer are incubated together with ATF3-HRP conjugate in pre-coated plate for one hour. After the incubation period, the wells are decanted and washed five times. The wells are then incubated with a substrate for HRP enzyme. The product of the enzyme-substrate reaction forms a blue colored complex. Finally, a stop solution is added to stop the reaction, which will then turn the solution yellow. The intensity of color is measured spectrophotometrically at 450nm in a microplate reader. The intensity of the color is inversely proportional to the ATF3 concentration since ATF3 from samples and ATF3-HRP conjugate compete for the anti-ATF3 antibody binding site. Since the number of sites is limited, as more sites are occupied by ATF3 from the sample, fewer sites are left to bind ATF3-HRP conjugate. Standards of known ATF3 concentrations are run concurrently with the samples being assayed and a standard curve is plotted relating the intensity of the color (Optical Density) to the concentration of ATF3. The ATF3 concentration in each sample is interpolated from this standard curve